Mining Reversing/Visibility 7" Monitor Camera System  (R-KQM74*32)

In stock

Quad Rear-View Vehicle Camera Kit

split reverving camera monitor

7" Quad Vehicle Observation Rear View Monitor (R-KQM74*32)
Kit Includes
• 1 x R-MQ1736 High Quality 7inch Quad TFT LCD Display Monitor 
• 4 x C18032 1/3-inch Sharp CCD Side View Cameras
• 3 x 15m Cable
• 1 x 20m Cable
• 1 x Removal Sun Visor
• 1 x U-Support Bracket
• Angle Adjustment Screws
• Electrical Connecting Cables
• Remote Control (Battery Not Included)
• User Guide
Trigger Wires White, Brown, & Blue do not have to be connected, they only require connection if you want a camera to come on automatically when the vehicle is put in reverse for example.



Kit Includes

  1. High Quality 7" Quad TFT LCD Display Monitor
  2. 4 x C18032 1/3-inch Sharp CCD Camera
  3. Electrical Connecting Cables
  4. 3 x 15M Cable
  5. 1 x 20M Cable
  6. Remote Control
  7. User Guide

7" Reversing Quad Monitor 

split reverving camera monitor

 Model: Model:  R-MQ1736
• 7" Digital Screen TFT LCD Quad Monitor with Removable Sun Visor
• Single View/Split View/Three View/Quad image View Selectable. Eight different view modes. Each camera can be fully displayed when it is triggered.
• Blue Backlight Keypad will Help Drivers to See and Operate Accurately at Night or Low Light Situation.
• White lasered engraved buttons that are backlit for clear day and night vision.
• The monitor shell is made from tough PC/ABS to withstand high temperatures in the cab.
• The Thin Film Transistor (TFT) is a liquid crystal display allowing for a clear picture at high speeds.
• OSD MENU Separately Set Each Camera Trigger Priority
• OSD MENU Separately Set Each Camera Reversing Image Delay Time 0-30s
• OSD MENU Separately Set Each Camera Image Can be Rotated to Mirror or Non-mirror
• Application USA Techwell Automotive Digital Video Processor
• 1 Cable Solution System Make It Easy For Users To Install.
• 4 Color Trigger Wires (reversing/ turn left/ turn right/ front) are used for Automatically Showing full Screen Image when it is Activated.
• Colour System:PAL/NTSC (AUTO)
• Display Resolution: 800RGB(H) X 480(V) dot
• Support Four Camera Inputs:1.0Vp-p75Ω
• Wide View Angle(CR:10):(up/ down): 45/65 (left/right): 65/65
• Brightness (cd/m2): 400 ( Automatically Adjust Environment by According)
• Contrast Ratio: 500:1
• Back-Light:Single LED
• Backlight Compensation: Auto
• Operating Temperature: -20℃ to +70℃
• Storage Temperature: -30℃ to +80℃
• Load Dump: DC14+87V(Td400mS) 5pulses
• Free Operating Voltage: DC11-32V (System Power Max 20W)
• External Dimensions:L*W*T(185X122X45)mm(without mounting)
• Weight Approx: 468g
• Two Year Warranty
• Product Accessories
• U- Support Bracket、Angle Adjustment Screw、Removable Sun Visor、Electrical Connecting Cable、Remote Control (Battery Not Included), User's Manual

Quad Monitor Views

Installation Instruction:

Side View CCD Camera Waterproof & Anti-Fog 

The Side View Camera design is suitable for Mining Vehicles, Commercial Vehicles, Farming & Heavy Machinery, Buses Taxies and Vans. Offering all Round Visibility and a Wide Field View.
 Model:  R-C18032
• Lens Angle: 90°
• Image device:  1/3" SHARP COLOUR CCD
• Effective Pixels: PAL: 752(H)×582(V)
• Sensing Area: 4.9mm(H)×3.7mm(V)
• Scanning System: PAL:625 Lines 50 Field/sec
• Sync. System: Internal
• Resolution: 600 TV Lines
• Electronic Shutter Time On: PAL 1/50~1/100,000Sec; Off: PAL 1/50 Sec
• Usable Illumination:  0 lux with built-in IR LED
• IR project distance:10 meters(10 Unit Infrared LED)
• IR Status: Under 10 Lux by CDS
• Gamma Consumption: 0.45
• Lens: Board Lens 2.9mm
• Gain Control(AGC):Auto
• Waterproof Rating:  IP69K
• Operation Temperature:-20℃~+50℃ RH95% Max
• Storage Temperature: -40℃~+80℃ RH95% Max
• Power Supply:DC12V±10% 400mA
• Dimension:  60(L) x 75(W) x 90(H)mm
• Weight: 400g  
• Two Year Warranty

If your intention is to install one of NAS's Cameras on another brand of reversing camera monitor or Navigation/Stereo System then you may require a RCA cable and cable.

The RCA cables can be found on this page. The Cables can be found on this page

All of NAS's Cameras have a female ended Connection.

The length of cable attached to the camera is approx. 350mm. 

 Wired Camera 4PIN Aviation Definition

No posts found

Write a review