This system is fully expandable several Solar Sensors Beams can be positioned around your business, house and property and when they detect movement it will activate the Indoor Security Alert located indoors. Each Solar Sensor Beam can be programmed so that it has a different chime. Likewise, several Indoor Security Alerts can be paired to one Solar Sensor Beam.
The Solar Sensor Beams can be mounted clear-line of sight up to 500M from the Indoor Security alert. Buildings and thick vegetation between the Indoor Security Alert and the Solar Sensor Beams will reduce the wireless distance however as a general rule 350m in this circumstance is achievable.
The Indoor Security Alert connects wirelessly to the solar beams, it is the receiver that will chime when the infra-red sensors on the Solar Sensor Beam is broken by a person or vehicle. The Indoor Security Alert is not waterproof and requires power. Many Indoor Security Alerts can be paired wirelessly to one set of beams therefore you can have one in your house and one in the shed for example.
The Indoor Security Alert has an option to be wired into other devices like alarm systems, sirens and lights as it has 4 dry output contacts (relay outputs). If it is wired into an alarm system when the solar beams are broken it will activate the alarm system as well as chime in your premises to alert you of a boundary entrance breach. The solar beams are and act the same as an alarm detector/sensor. Therefore, if your alarm system is monitored the monitoring station will call you and notify you of the security breach if a vehicle or a person has moved between the solar beams. If your alarm system calls you directly then you will receive an alarm activation call or message on your mobile phone.
Indoor House Security Alert (DW-R86)
|• Ring Tone will sound for 8 seconds|
|• Volume Control Adjustment|
|• House Alert Alarm Volume ≤ 80 dB|
|• Several Indoor House Alerts can be Installed on One Set of Beams|
|• House Alert Requires 240V Power|
|• House Alert Is Not Waterproof - Indoors Only|
|• 2 Year Warranty|
Driveway Alert Solar Sensor Beam (DW-RSSB500M)
|• Solar powered built-in rechargeable batteries|
|• Charges on cloudy and rainy days via the solar panel, the solar panel only requires natural light to charge not full sun.|
|• The Solar Sensor can be mounted clear-line of sight up to 500m from the Indoor Chime Alert located inside the dwelling. Buildings and thick vegetation in-between, will reduce the wireless distance.|
|• The detection range can be changed to suit a particular distance, if programmed on the High setting 15m, Medium 9M, or Low 7M. The beam width is approx. 1 meters wide.|
|• To detect cars and people mount the Solar Sensor 900mm from the ground.|
|• The Solar Sensor can be used indoors. A USB lead is included & a 5V phone charger is recommended to use to charge.|
|• With correct installation a Solar Sensor can trigger an alarm approx. 200 times within a 24 hour period.|
|• Solar Sensor is waterproof IP65|
|• Advanced Wireless Transmission Technology FSK + FHSS has reduced the potential for false alarms.|
|• An improved motion detection chip and the detection angle has been refined to prevent false alarms from wind, dead leaves and small animals.|
|• 32 Solar Sensor can be programmed into one Indoor Chime Alert providing boundary/fence security on a property.|
|• Working Voltage 3.3V|
|• Solar battery life approx. 3 years or more, batteries can be replaced.|
|• Battery type LiFePO4Li-ion battery|
|• Solar output current ≥ 4mA at an Illumination level of 1800Lx|
|• Note that outdoor Illumination on raining days is approx. Level of 2000Lx|
|• 2 Year Warranty|