NAS Solar Driveway Alert Solar Beam Sensor Detects Movement and Wirelessly Triggers the Indoor Chime, Operates by Power &/or Batteries (DW-N85SSB500M)

$141.00
DW-N85SSB500M
In stock
+

The Indoor Alert has the option to be powered by 240V power or batteries or both in the case of a power failure.

The installation is simple and easy, turn the Solar Beams on, mount them and plug in the Indoor chime. No programming required. 

Applications- Driveway Alarm, Business Entrance Alert, Perimeter Fencing Alarm, Swimming Pool Alarm. Made for the Australian environment.

There is no cabling required and no replacing batteries, the waterproof solar beams require outdoor light and the Indoor Chime requires a power point. 

Indoor Alert

 

 

Indoor Chime Measurements  & Components

To Adjust Volume on the Indoor Alert

Press and hold the on/off button first, and then press the " Tone " button to adjust the volume.

Indoor Alert (DW-R85)
• Fully Expandable System 
• Available in Black or white choose colour above.
• The Indoor Chime will chime when the Solar Beams activate.
• There are 35 different ring tones/chimes available to choose from.
• Four volume adjustments.
• Indoor Chime Alarm Volume ≤ 80 dB
• The Indoor Chime is not waterproof and requires 240V power.
• The Indoor Chime can have backup batteries for power outages.
• 32 sets of Solar Beams can be wirelessly linked to one Indoor Chime and each set of Solar Beams can have a different ring tone/chime so that you are made aware of what area has had gone into alarm. 
• Two driveways, two sets of beams, one Indoor Chime a different chime on each driveway. 
• 2 Year Warranty

 

Solar Sensor Beam

 
Driveway Alert Solar Sensor Beam  (DW-RSSB500M)
• Solar powered built-in rechargeable batteries 
• Charges on cloudy and rainy days via the solar panel, the solar panel only requires natural light to charge not full sun.
• The Solar Sensor can be mounted clear-line of sight up to 500m from the Indoor Chime Alert located inside the dwelling. Buildings and thick vegetation in-between, will reduce the wireless distance.
• The detection range can be changed to suit a particular distance, if programmed on the High setting 15m, Medium 9M, or Low 7M.  The beam width is approx. 1 meters wide.
• To detect cars and people mount the Solar Sensor 900mm from the ground.
• The Solar Sensor can be used indoors.  A USB lead is included & a 5V phone charger is recommended to use to charge.
• With correct installation a Solar Sensor can trigger an alarm approx. 200 times within a 24 hour period.
• Solar Sensor is waterproof IP65
• Advanced Wireless Transmission Technology FSK + FHSS has reduced the potential for false alarms.
• An improved motion detection chip and the detection angle has been refined to prevent false alarms from wind, dead leaves and small animals. 
• 32 Solar Sensor can be programmed into one Indoor Chime Alert providing boundary/fence security on a property.
• Working Voltage 3.3V
• Solar battery life approx. 3 years or more, batteries can be replaced.
• Battery type LiFePO4Li-ion battery
• Solar output current ≥ 4mA at an Illumination level of 1800Lx
• Note that outdoor Illumination on raining days is approx. Level of  2000Lx
• 2 Year Warranty