NAS Driveway Alarm - Detect An Intruder or your Visitors Have Arrived: Indoor Alert Includes a Power Lead or can Operate on Batteries, Solar Sensor Requires Natural Light (DW-N85SSB800M)

$135.00
DW-N85SSB800M
In stock
+

The Indoor Alert comes with a power lead or it can operate on batteries only or a combination of both. 

The batteries can act as a backup power supply in a power outage, or it can operate solely on batteries if there is no power available.

Made for the Australian environment.

Cover all of these areas and more, place a Solar Sensor over the front door, backyard, laneway, and or patio. Use as a business entrance alert, perimeter fencing alarm, swimming pool alarm, there are numerous application. 

No cabling required and no replacing batteries in the Solar Sensor, the waterproof Solar Sensor require outdoor light and the Indoor Alert requires a power point or Batteries.

The installation is simple and easy, turn the Solar Sensor on, mount it and plug in the Indoor Alert. No programming required

Indoor Alert

Indoor Chime Measurements  & Components

To Adjust Volume on the Indoor Alert

Press and hold the on/off button first, and then press the " Tone " button to adjust the volume.

Indoor Alert (DW-R85)
• Fully Expandable System 
• Available in Black or white choose colour above.
• The Indoor Chime will chime when the Solar Beams activate.
• There are 35 different ring tones/chimes available to choose from.
• Four volume adjustments.
• Indoor Chime Alarm Volume ≤ 80 dB
• The Indoor Chime is not waterproof and requires 240V power.
• The Indoor Chime can have backup batteries for power outages.
• 32 sets of Solar Beams can be wirelessly linked to one Indoor Chime and each set of Solar Beams can have a different ring tone/chime so that you are made aware of what area has had gone into alarm. 
• Two driveways, two sets of beams, one Indoor Chime a different chime on each driveway. 
• 2 Year Warranty

 

 

 

 

Solar Sensor

Driveway Alert Solar Sensor Beam (DW-RSSB800m)
• Solar powered built-in rechargeable batteries 
• Charges on cloudy and rainy days via the solar panel, the solar panel only requires natural light to charge not full sun.
• The Solar Sensor can be mounted clear-line of sight up to 800m from the Indoor House Security Alert located inside the dwelling. Buildings and thick vegetation in-between, will reduce the wireless distance.
• The detection range can be changed to suit a particular distance, if programmed on the High setting 20m, Medium 15M, or Low 8M.  The beam width is approx. 2 meters wide.
• To detect cars and people mount the Solar Sensor 900mm from the ground.
• The Solar Sensor can be used indoors.  A USB lead is included & a 5V phone charger is recommended to use to charge.
• With correct installation a Solar Sensor can trigger an alarm approx. 200 times within a 24 hour period.
• Solar Sensor is waterproof IP65
• Advanced Wireless Transmission Technology FSK + FHSS has reduced the potential for false alarms.
• An improved motion detection chip and the detection angle has been refined to prevent false alarms from wind, dead leaves and small animals. 
• 32 Solar Sensor can be programmed into one Indoor House Security Alert providing boundary/fence security on a property.
• Working Voltage 3.3V
• Solar battery life approx. 3 years or more, batteries can be replaced.
• Battery type LiFePO4Li-ion battery
• Solar output current ≥ 4mA at an Illumination level of 1800Lx
• Note that outdoor Illumination on raining days is approx. Level of  2000Lx
• 2 Year Warranty