The high quality waterproof 7" monitor screen is viewable under sunlight conditions. The monitor front casing is made from tough PC/ABS to withstand high temperatures in the cab and the back casing is made of Stainless Steel. It features buttons that are backlit for clear day and night vision. The Thin Film Transistor (TFT) is a liquid crystal display allowing for a clear picture at high speeds.
Camera Angles - 120°,90°,or 60°.
18pcs LEDs - Approx. 10m if there is no other light source.
Monitor Viewing Configuration
The monitor can take up to two cameras.
Click on the "Add Extra Cameras" Tab to add more cameras to this kit. Extra cable length will be required and can be selected on the same page.
Mounting Bracket
The monitor comes with the U-Shaped Bracket
Other Mounting Bracket Options
A suction bracket or a fan bracket can be purchased as an optional extra by by Clicking on the "Add Monitor Bracket Tab".
Cameras Can Be Mounted on a Magnetic Base for Ease of Fixing and Movability
To purchased as an optional extra click on the "Add Camera Magnet" Tab .
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS monitors have the 4-pin male ended connection and require the female ended extension cable.
Kit Includes |
• 1 x M73C High Quality 7inch TFT LCD Display Monitor |
• 1 x C14102 1/3" SHARP CCD 120° Camera Angle (Camera Angle Can be Chosen) |
• 1 x 8m Cable |
• Electrical Connecting Cables |
• Remote Control (Battery Not Included) |
• User Guide |
• Monitor Supports Three Cameras, Additional Cameras can be Added in the Future |
The trigger cables White, & Blue do not have to be connected, they only require connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wires are connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger cables wrap individually in insulation tape.
Waterproof Colour Monitor(R-MW755) |
• 7"Digital Screen TFT LCD Colour Monitor with Removable Sun Visor |
• Waterproof: IP68 |
• OSD MENU Separately Set Each Camera Reversing Image Delay Time 0-30" |
• OSD MENU Separately Set Each Camera Mirror/Normal image |
• Camera 1 Trigger Priority |
• Colour System:PAL/NTSC (AUTO) |
• Display Resolution: 2400(H) X 480(V) dot |
• Support Two-channel Camera Video Inputs:1.0Vp-p75Ω |
• Wide view angle(CR:10):(up/ down): 45/65 (left/right): 65/65 |
• Contrast ratio: 500:1 |
• Back-light : Single LED 400cd/m2 Brightness |
• Operating temperature: -20℃ to +70℃ |
• Storage temperature: -30℃ to +80℃ |
• Power Supply: DC10~32V |
• Load Dump: DC14+87V(Td400mS) 5pulses |
• External dimensions: (L x W x T) (199 x 136 x 30mm) without mounting Sun Visor |
• Weight Approx: 379g |
Trigger Wires White, Brown, & Blue do not have to be connected, they only require connection if you want a camera to come on automatically when the vehicle is put in reverse for example. |
Sharp Waterproof & Anti-Fog Reversing Cameras reversing |
Camera Descriptions please click on the links below |
• C14102 120° Viewing Angle |
• C023.6 90° Viewing Angle |
• C026.0 60° Viewing Angle |
• Image Pick-up Device 1/3" SHARP COLOUR CCD |
• Horizontal Resolution 600 TV Lines |
• Number of Pixels PAL: 752(H)×582(V) |
• Colour System: PAL |
• Illumination 0Lux (18pcs LEDs On for Night Vision) |
• Shockproof 10G |
• Brightness (cd/m2): 400 |
• Waterproof IP69K |
• Operation Temperature -20℃~+50℃ RH95% Max |
• Storage Temperature -40℃~+80℃ RH95% Max |
• Power Supply DC12V±10% 400mA |
• Dimension 38(D) x 69(W) x 43(H)mm (without Mounting) |
• Weight 300g |
• Two Year Warranty |
The 30° angled camera has a long narrow angle and provides a view in the monitor like looking into a Rear-Vision Mirror. This camera will provide the most accurate view of the distance a vehicle is travelling behind you. However it is not the best camera to reverse into tight places in caravan parks as it is not a wide angled lens camera. Some customers install two cameras on the back of their caravans, the 30° for travelling and the 120° for reversing.
Caravan Rear-View Camera "Perfect Rear View Just Like Looking in a Normal Mirror".
"The new camera (12mm lens) gives a perfect rear view and is just like looking in a normal mirror. Unlike the 90 degree or even the 60 degree camera I can now see traffic approaching from a long distance behind the caravan without losing a reasonable angle of view when traffic is immediately behind the caravan.
I’ve attached an iPhone photo I took while I was stopped by roadworks. Although the quality isn’t great it gives you an idea of the natural perspective the new camera gives.
As far as I know, the first true rear-vision camera fitted to a caravan in Australia. All the others I would classify as primarily reversing cameras. Of course the 12mm lens (30 degree) camera is not suitable for reversing into tight spots but excels in its application on the open road. When I get some time I am going to mount my old 92 degree camera in a suitable spot under the back of the van with an automatic switchover when in reverse so I can have the best of both worlds".
I am very happy to endorse the superb support and follow up I have received from NAS Security".
Howard Shephard Western Australia
P.S. If you are planning to offer the 12mm camera for sale it is important to emphasise that the camera is mounted onto a firm base to avoid camera shake on rough roads, which can be an issue with long focal length cameras.
The length of cable attached to the camera is approx. 350mm in length
Sharp CCD 30° Cameras (Model R-CS212B or R-CS212W)reversing safety |
• Image - Rear-View, NAS Monitor Can Change Image to Forward Facing |
• Image Pick-up Device 1/3" SHARP 960H COLOUR CCD |
• Horizontal Resolution 600 TV Lines High Definition |
• Number of Pixels PAL: 752(H)×582(V) |
• Pixel pitch: 5.0μm*7.4μm |
• Illumination 0.1 Lux (day) 0Lux (with IR) |
• 4pcs High Quality SMD LEDs On for Night Vision |
• Night Vision Distance: Approx. 10m |
• Automatic Adjusts with Day/Night Sensor |
• Anti-Vibration 10G |
• Scanning System 2:1 Interlace |
• Horizontal Sync: 15.63 kHz |
• Vertical Sync. Frequency: 50 Hz |
• Automatic Gain Control (AGC) Auto |
• White Balance: Auto |
• BLC: Auto Adjusts with Brightness |
• Electronic Shutter: 1/50(PAL)~1/100,000 Seconds |
• Waterproof IP69K |
• Operation Temperature -30℃~+70℃ RH95% Max |
• Storage Temperature -40℃~+80℃ RH95% Max |
• Current Consumption: Max. 200 mA |
• Power Supply DC12V |
• Dimension 38(D) x 69(W) x 43(H)mm (without Mounting) |
• Weight 500g |
• Two Year Warranty |
No posts found